Find your inspiration and bring it to life...

Color-Matic II


 

The capability to provide a spectrum of uniform colors without the mess and waste of powder is the demand of today's concrete industry and Increte Systems' Color-Matic II Liquid Coloring System has become the industry standard to meet that demand.

Color-Matic utilizes the highest quality pigments blended with computer accuracy to match hundreds of industry colors or create custom colors at the touch of a finger.  Plus specific batch color parameters are stored and can be accurately re-created if required at any time.

Accuracy, efficiency, convenience, and the support of the Industry's leader in Decorative Concrete Products, add-up to one important result - Profitability!

Pdf _icon _Mini4 Color-Matic II Fact Sheet
Pdf _icon _Mini4 Color-Crete Color Chart
Pdf _icon _Mini4 Color-Crete Liquid Tech Data

Features
•    Main Station (Main panel & weigh vessel) 48"x 48"x72"
•    350 gal. Conical Tote (4 or 5) 54"D x 85"H
•    Required Floor Space 150 sq. ft. 30'L x 5'W

Specifications
•    Full Color 15" Touch screen in system panel with E-Stop
•    PC Controller in Batch office with on-screen E-Stop
•    Over 500 Pre-Load programmed color recipes
•    Dual dispensing capability (Bucket and Truck)
•    60 Gal. full drain, dry to wet slurry
       blender/weigh vessel.
•    Batch to 1, 3.5, and 5 gallon buckets
•    Manual & Automatic dump/rinse cycles
•    Alarms Indicate - Low Air or Water,
      out of Tolerance, No Bucket, and Overpressure.
•    Ergonomic layout of batch screen containing visual
      references for all functions
•    Individual batch reports with option to print on demand
•    SPX-25 Peristalic Pumps
•    Four point load cell for accuracy down to thousandths
•    Nema 4 Enclosure


System Configuration
•    Pumps are mounted on supply totes
•    Main station contains main electric panel, scale,
     weigh vessel, and discharge pump.
•    Main station should be located in close proximity to
     discharge point (<100 ft)
•    Supply totes should be positioned next to main station
•   PC to main station should not exceed 300 ft. 


System Requirements
•    460V 3phase, 30AMP
•    CAT 5 Ethernet
•    90 PSI.,15-20 CFM, 1/2" FPT
•    40 PSI. Continuous Pressure 3/4" FPT

 

 

Color -Matic -II-Combo -Graphic

 

 

 

 

 

 

 

 


 

MSDS

©2013 The Euclid Chemical Company     Terms of Use      Privacy Policy     
  • 1611 Gunn Highway, Odessa, FL 33556
  • (813)886-8811
  • toll free (800)752-4626
  • info@increte.com